- To begin the process of cleaning a scotsman ice maker (Prodigy Plus Nugget or Flaker Ice Machine), follow these steps: 1. Press and hold the red off button for a few seconds. 2. Remove the front panel by unscrewing the two screws that are located in the bottom corners of the panel. 3. Starting at the bottom, carefully slide the front panel forward and down to remove it from the machine.
- 3.
How do you get mold out of a Scotsman ice maker?
Instructions for Cleaning an Ice Maker that Has Mold and Slime
- Saturate the contaminated surfaces with your EPA-approved cleanser by spraying it on them. Wipe the affected areas to eliminate any pollutants if necessary. If you’re disinfecting the area, let the solution stay for 10 minutes before completely rinsing the area.
- After rinsing, follow the “sanitizing” directions on the label.
How long is clean cycle on Scotsman ice machine?
It is necessary to conduct the rinse cycle because it will completely flush out all of the Scotsman Ice Machine Cleaner from the water supply system. This rinse cycle should take no more than 20 minutes total.
How do you turn off the sanitize light on a Scotsman ice machine?
The De-Scale & Sanitize light will be activated after 6 months of continuous power use on the system. This feature will be turned off once the computer has gone through the cleaning process detailed here: After turning off the water and draining the reservoir, fill the reservoir with a scale remover solution to flush out any remaining scale deposits.
How often should you clean Scotsman ice machine?
It is recommended that every ice machine be cleaned and disinfected at least twice a year, even if the water is of excellent quality. Machines must be cleaned more often in some applications, such as those where the air or water quality is poor. Even ice machines that are fitted with purge valves must be cleaned at least once every six months to ensure proper operation.