How To Clean Condenser On Sub Zero Model 695 Refrigerator?


  1. Turn the machine off by pressing the power button on the control panel. To turn the unit on or off, press the unit On/Off button or push the control dial down beyond 1.
  2. Remove the louvered grille or grille panel from the doors by opening them. Dust and lint may be removed from the condenser region by using a soft bristle brush attachment on a vacuum cleaner. Turn on the device and keep an eye on the temps.
  • To clean the condenser, use a soft bristle brush and a vacuum to remove dust and lint from the unit. Make sure to vacuum in the direction of the condenser fins, both up and down, to avoid bending the fins.

Where is the condenser on my Sub-Zero fridge?

The condenser is positioned beneath the grill on all Sub-Zero Built-In and Pro 48 refrigerators and freezers. Remove the bottom edge of the grill and tilt it forward before continuing. After that, vacuum the condenser with a soft bristle brush to remove any dust or lint that has accumulated.

How do you clean condenser coils?

You may clean the condenser coils with a simple solution of water and dish soap, or you can use a condenser coil cleaner. Wipe off the condenser coil fins using a sponge or soft brush to remove any debris. Alternatively, a spray bottle can be used. Just remember to use caution.

How do you clean a Sub-Zero 685 condenser?

To clean the condenser region, attach a soft bristle brush attachment to your vacuum and vacuum the area thoroughly. Cleaning the condenser can be accomplished with a paint brush, an air compressor set on a low setting, or a can of pressurized air.

See also:  How To Remove Wood Front From Sub Zero Refrigerator? (Best solution)

How do I clean my Sub-Zero ice maker?

To clean the 315I Ice Maker, follow these steps:

  1. Open the refrigerator door and turn the ice maker control knob to the OFF position. Make a thorough cleanup of all of the ice and toss it away or store it in an ice chest or cooler. Sub-Zero ice maker cleaner should be added to the ice maker reservoir in four ounces increments. Turn the ice maker control to the NORMAL position
  2. the cycle will take approximately two hours.

What would the symptoms of a dirty coil be?

When the evaporator coil is unclean, one of the first things you’ll notice is that your air conditioner will not create air that is as chilly as it should be. A reduction in heat transfer efficiency has an adverse effect on the efficiency of the cooling process. If it becomes apparent that your air conditioner is not cooling your air, you should have the evaporator coil inspected immediately.

How do you move a fridge to clean it behind?

Move your refrigerator away from the wall in the safest and most efficient manner possible by grabbing it on both sides of the door and gently scooting it forward, swaying it slightly from side to side and moving slowly and carefully, step by step. Most individuals who are frightened by the size of their refrigerator will realize that this method works really well!

How do you clean under a fridge without moving it?

In order to clean beneath your appliances without having to move them, take a yardstick and wrap the end with old pantyhose, a microfiber cloth tied with a rubber band, or an old tube sock. Sweep your tool beneath each appliance several times in a circular motion. What you’ve unearthed should be vacuumed or swept away.

See also:  How To Replace The Water Inlet Valve On A Scotsman Undercounter Ice Machine?

Where is condenser coil fridge?

The condenser coils are positioned either under the refrigerator, behind the base grille, on the back of the refrigerator, or on the top of the refrigerator, depending on the model of refrigerator. Always disconnect the refrigerator from the power source before doing any maintenance or cleaning on it. This will help to reduce the risk of electric shock.

How do I reset my Subzero refrigerator?

To reset a Sub-Zero product, follow these steps:

  1. Turn the machine off by pressing the power button on the control panel. If your machine has a dial control, set it to zero (0) or turn it completely off. Turn off the house circuit breaker that serves the device for 30 seconds and then turn it back on. Re-evaluate the operation of the unit.

Do refrigerator coils need to be cleaned?

At the control panel, turn the machine off. When using a dial control, set the dial to zero (0) or turn it off entirely. For 30 seconds, turn off and then back on the circuit breaker that serves the device. The unit’s functionality should be checked once again.

Leave a Reply

Your email address will not be published.