- •Remove any and all ice. To turn off the computer, press and hold the On/Off button for three seconds until the green light goes out. To turn it back on, press and hold the Clean-Reset and On/Off buttons for five seconds. On and off will be the Time to Clean light blinking on and off. Scale Remover – Part 2 of 2 Continued Place 8 ounces of Scotsman Scale Remover in the machine’s reservoir and run the machine for half an hour.
How do you reset a Scotsman cu50 ice maker?
Replace the compressor on your Scotsman ice machine. Using the “off” button on the control panel, you may shut off the machine completely. Once you have waited around 10 seconds, hit and hold the “on” button for a couple of seconds. This will switch the machine back on and begin the process of restoring it to its factory settings.
How do I clean my ice maker?
Fill an empty spray bottle halfway with vinegar and liberally spray the inside of your ice maker’s inside with it. Allow for five minutes of soaking time before running a wash cycle. If your ice machine is really filthy, you may need to repeat the cleaning process many times.
Why is my Scotsman ice maker not making ice?
The low room temperature – Most Scotsman ice makers will not produce ice at temperatures below 55 degrees Fahrenheit (13 degrees Celsius). Place the machine in a warmer room or in a more comfortable environment. Problems with the fan motor – The fan motor may not be rotating or may have an open pressure control. Examine the motor and fan blades to see whether they have been damaged.
How often should you clean Scotsman ice machine?
Ice will not be produced if the room temperature is below 55 degrees Fahrenheit, which is typical for most Scotsman ice producers. Make sure the machine is in a warm room or at a warmer setting. Problems with the fan motor – The fan motor may not be rotating or it may have an open pressure control valve. Examine the motor and fan blades to see if they are broken.
How long does it take to clean Scotsman ice machine?
In accordance with the Scotsman Ice Machine cleaner instructions, the cleaning solution should circulate for approximately 10 minutes after being added. Push and release the Clean button once every ten minutes for a total of ten minutes. After pressing the Clean button, a light will illuminate, signaling that the rinse procedure has begun.
Can you use vinegar to clean an ice machine?
Ice Machine for Commercial Use Turn off the ice machine and empty the ice bin of all of the ice it has collected. the inside of the ice machine with the vinegar mixture, spraying it down completely Wait 5 minutes before carefully cleaning and re-spraying the ice maker. Allow for another five minutes of setting time.
How do you troubleshoot a Scotsman ice maker?
Troubleshooting Guide for the Scotsman Ice Machine
- Troubleshooting Guide for the Scotsman Ice Maker
What does Code 2 mean on Scotsman ice machine?
Diagnostic Codes are a type of code that may be used to diagnose a problem. 2 – A lengthy harvesting period. The system is being shut down. 2 (flashing) – Attempting a second time with a lengthy harvest cycle. 3 – The water is steadily filling.
How do you get mold out of a Scotsman ice maker?
Instructions for Cleaning an Ice Maker that Has Mold and Slime
- Saturate the contaminated surfaces with your EPA-approved cleanser by spraying it on them. Wipe the affected areas to eliminate any pollutants if necessary. If you’re disinfecting the area, let the solution stay for 10 minutes before completely rinsing the area.
- After rinsing, follow the “sanitizing” directions on the label.