Four of the first five digits of the serial number are devoted to the date of manufacture. Four numbers are used to identify the product: the first two represent the year it was created, while the third and fourth represent the month it was manufactured.
- Until May 2004, Scotsman ice makers were made with date codes in the final three digits of the serial number. There are two numbers denoting the month and a letter signifying the year in the final three digits of the number. Codes for the month of the year
What year is my ice machine?
Locate a box that contains MF DT or MFG DT (manufactured date) followed by four numbers on the data plate to determine the date the product was manufactured. The year is represented by the first two numerals, which are followed by two digits signifying the month.
How do I read my ice O Matic serial number?
The second digit in the serial number represents the year the machine was manufactured: for example, 0 = 1990 (M-Z), 1 = 1991, 2 = 1992, 3 = 1993, 4 = 1994, 5 = 1995, 6 = 1996, 7 = 1997, 8 = 1998, 9 = 1999, 0 = 2000. The first digit in the serial number represents the year the machine was manufactured: for example, 0 = 1990 (M-Z), 1 = 1991, 2 = 1992, 3 = 1993, 4 = 1994, (A-L).
How long do Scotsman ice makers last?
Investing in a Scotsman Ice Machine: The Top 5 Reasons Why Its machines are built to survive for more than ten years (more than twice the life expectancy of competing manufacturers), and its ice machines are very quiet in an industry where noise is inherent in the appliance sector.
How do you read a Manitowoc serial number?
The nomenclature of a Manitowoc serial number is straightforward to read. The four-digit code is preceded by the year of manufacture and then the month of manufacture. For example, the label on the machine in the illustration above states MFG DT 1809, indicating that it was made in September 2018. In models manufactured before to 2006, the date is reflected in the serial number.
How do I find out what year my Scotsman ice maker is?
Identifying the nomenclature of a Manitowoc serial number is straightforward. In the year column, the four-digit code is preceded by the month in which the item was manufactured. When the label of a machine says MFG DT 1809, it indicates that the machine was built in September of that year. The date is included in the serial number of pre-2006 models, but not after 2006.
How old is my Scotsman ice maker?
The serial number contains the manufacture date code, which may be found inside it. The age of the machine will be presented in one of two ways, depending on the model number. When you check at the serial number, for example, 111111-07Y, the final two digits and letter inform you that it was created in January of 1992, according to the manufacturer.
Why is my ice O Matic not making ice?
It may be necessary to repair a defective contactor or coil, or it may be necessary to replace a damaged compressor or starting components. Replace these components, or the whole compressor assembly, with those provided by an authorized technician. If you see any water escaping from the purge drain or water trough, it is likely that the purge valve has failed. Both of these factors might hinder the formation of ice.
How do you adjust the ice thickness on an ice O Matic?
When you open your machine, you should be able to view the ice thickness sensor, which is fastened with a single screw. A quarter-turn counterclockwise on this screw will result in an ice bridge that is narrower and thinner. Increase the size of the bridge and the thickness of the ice by turning this screw one quarter turn clockwise.
Why is my ice O Matic freezing up?
The temperature of the water is too high — Hot water coming into your machine might cause the ice machine to malfunction. It takes the evaporator an excessive amount of time to cool down the water and freeze it into cubes, triggering a sensor within the machine to activate. Water that is not pure – The most typical problem that ice machines encounter is due to the water that they utilize.
How do I reset my Scotsman ice maker?
Replace the compressor on your Scotsman ice machine. Using the “off” button on the control panel, you may shut off the machine completely. Once you have waited around 10 seconds, hit and hold the “on” button for a couple of seconds. This will switch the machine back on and begin the process of restoring it to its factory settings.
Who owns Scotsman ice machines?
In a deal for around $575 million, private-equity company Warburg Pincus has agreed to sell ice machine manufacturer Scotsman Industries Inc. to Italian food-service giant Ali Group, according to individuals familiar with the transaction.
Where is the model number on a Manitowoc ice machine?
When seeking information from your local Manitowoc distributor or from Manitowoc Ice, Inc., these numbers must be included in your request. The MODEL/SERIAL NUMBER DECAL, which is attached to the ice machine, remote condenser, and storage bin, contains information on the model and serial number.
How long do Manitowoc ice machines last?
According to Manitowoc, the typical lifespan of a commercial ice machine is between 7 and 10 years.