Troubleshooting Guide for the Scotsman Ice Machine
- Room temperature and water temperature should be checked, as well as machine leveling and deep cleaning.
- The waterline and water regulator valve should be checked, as well as machine leveling and deep cleaning. When should servicing be scheduled?
partstown.com
- Troubleshooting for the Scotsman Ice Machine It is necessary to examine the start capacitor, the start relay, and the compressor windings if the compressor will not begin to operate. It is necessary to check the circuit board and contactor coil if the auger motor is functioning but not creating ice at the time.
Why is my Scotsman ice machine not making ice?
The low room temperature – Most Scotsman ice producers will not manufacture ice at temperatures below 55 degrees Fahrenheit (13 degrees Celsius). Place the machine in a warmer room or in a more comfortable environment. Lower than normal refrigerant charge — A low refrigerant charge might make ice formation more difficult.
How do I reset my Scotsman ice maker?
Replace the compressor on your Scotsman ice machine. Using the “off” button on the control panel, you may shut off the machine completely. Once you have waited around 10 seconds, hit and hold the “on” button for a couple of seconds. This will switch the machine back on and begin the process of restoring it to its factory settings.
How do you troubleshoot an ice maker?
The ice maker is not producing enough ice.
- Check the level of your refrigerator to ensure that it is completely level. Check the level of your ice maker unit to ensure that it is working properly. Make a visual inspection of the water supply line for damage, pinching, or kinks. Ensure that the fill cup is properly aligned with the water funnel by checking it periodically.
What does Code 2 mean on Scotsman ice machine?
Diagnostic Codes are a type of code that may be used to diagnose a problem. 2 – A lengthy harvesting period. The system is being shut down. 2 (flashing) – Attempting a second time with a lengthy harvest cycle. 3 – The water is steadily filling.
How do I force my ice maker to cycle?
For little notch in your gear, you may require the use of a flat-head screwdriver to complete the job. Use it to rotate your gears counterclockwise until you hear the click that was described. The ice maker will cycle as a result of the click that is heard in both circumstances.
How long do Scotsman ice machines last?
Investing in a Scotsman Ice Machine: The Top 5 Reasons Why Its machines are built to survive for more than ten years (more than twice the life expectancy of competing manufacturers), and its ice machines are very quiet in an industry where noise is inherent in the appliance sector.
How do I reset my ice maker?
Turn the ice maker on and off many times. It is as simple as resetting the power to your ice machine to correct the situation. In certain cases, turning the switch off and back on may be enough to restore functioning to your ice maker and get it to start dispenseing again.
Where is the reset button on ice maker?
This button is located on the right side of the ice maker and is made of transparent rubber. It is shaped like a rectangular prism. Press and hold the reset button for a few seconds. For devices manufactured in 2010 or after, you will hear a chime signaling the start of the reset process. For years 2009 and before, press and hold the reset button for a full ten seconds to restore your system.
How do I know if my ice maker is bad?
It is likely that the water entry valve is faulty if your ice machine produces cubes that are kicked into a bucket. If there are no fresh cubes in the bucket, this indicates that the ice machine is malfunctioning.
Why is my ice maker not working but water does?
If the water intake valve is faulty or if the pressure inside it is insufficient, water will not be able to flow through it at all. As a result, the ice maker will be unable to produce ice. In order for the valve to work correctly, it must be under 20 psi. Make sure that the water pressure at the valve is at least 20 psi before turning on the water.
What does short freeze mean on ice machine?
On a Scotsman, Code 8 indicates that there is a brief freezing period. This is caused by the following factors: Inappropriate water flow Because of the growth of scale on the ice thickness sensor, water is splashing over it. Inaccurate readings from the ice thickness sensor An ice thickness sensor that has been shattered, deformed, or uninstalled. Follow the steps outlined below to thoroughly clean the spillway surface.