- Check to ensure that the electrical supply for the item is up to code. Before connecting in and turning on the unit if it has been moved, make sure it has been sitting in an upright posture for at least 24 hours before plugging it in and turning it on. More information may be found in Moving a Sub-Zero.
Why is my Sub-Zero refrigerator light off?
If the temperatures on the display are dim, it is possible that the equipment is in Sabbath Mode. Instructions on how to exit Sabbath Mode may be found in the Sabbath Mode Information section. If the door is left open for an extended period of time, the light terminator function can be activated, which will turn out the lights. For information on how to reset light terminators, see Light Terminators.
How do you turn off a Subzero refrigerator?
To switch off the refrigerator and freezer, turn the control knob to the zero position or to the off position. If the unit’s lights remain on or the condenser fan motor continues to operate after the dials have been set to the off position, shut off the unit at the circuit breaker.
How do I turn my Sub-Zero fridge back on?
Turn off the house circuit breaker that serves the device for 10 seconds before turning it back on. Re-evaluate the operation of the unit. Check to verify that the power cable is firmly connected to the unit’s electrical socket. Unplug the unit and re-plug it into the outlet.
How do you turn on a Sub-Zero freezer?
To begin generating ice, simply press the ice button. When the ice maker is turned on, the word “ice” will be lit on the display. If there is an issue with the temperature or the icemaker, you will be notified by a blinking service indication light. Additionally, if the condenser requires cleaning, the same service light will illuminate.
What happens when fridge light goes out?
A total power loss to the house will result in the failure of the lightbulb in the refrigerator, as well as the failure of every other light fixture and appliance in your residence. If this occurs, try to keep the refrigerator door closed as much as possible to safeguard the food within until the electricity is re-established.
How do I turn on my fridge after a power outage?
The refrigerator may be turned on by either pushing the relevant button on the control panel or by turning the switch placed within the refrigerator. When you switch on your refrigerator, the temperature will vary depending on the type. The GFCI power outlet that the refrigerator is hooked into should be checked if the refrigerator is still not turning on.
How long does it take for a Sub-Zero refrigerator to get cold?
The change in temperature does not occur immediately. Allow at least 24 hours for the device to achieve the desired operating temperature.
What temperature should a Subzero refrigerator be?
Within the refrigerator, the temperature range of a Sub-Zero with an electronic control panel ranges from 34 degrees Fahrenheit to 45 degrees Fahrenheit (1 degree Celsius to 7 degrees Celsius) degrees, and in the freezer, the temperature range is from -5 degree Fahrenheit to 5 degree Celsius.
How do you turn off a Sub-Zero freezer drawer?
Answer:
- Answer:
How do I unlock Sub-Zero control panel?
If the dispenser is equipped with a Lock button, the following steps must be taken:
- To activate the dispenser lock, press and hold the button for three seconds. When the dispenser is locked, the lock icon is illuminated to indicate that it is locked. The water and ice dispensing functions are disabled when the dispenser is locked. To unlock, press and hold the button for three seconds.
Why is my Sub-Zero freezer not cold?
To activate the dispenser lock, press and hold the button for 3 seconds. When the dispenser is locked, the lock icon lights. Water and ice dispensing functions are turned off by locking the dispenser. In order to unlock the device, press and hold for three seconds.
How do you set the temperature on a Sub-Zero?
Set the dial on these Sub-Zero devices anywhere between 4 and 6.1 degrees Celsius to modify the temperature. The temperature will become colder when the setting is increased. It will take a full 24 hours for the new setting to take effect once you’ve made the adjustment.
How do I turn on the ice maker in my Subzero refrigerator?
On and off the ice maker are accomplished by pressing the Ice Maker key located on the control panel’s control panel panel. When the ice maker is switched on, a single ice cube symbol will appear on the screen. To switch off the water supply to your home for a lengthy period of time, start by turning off the ice maker first, followed by the rest of the household water supply.
What is a sub 0 refrigerator?
On and off the ice maker are accomplished by pressing the Ice Maker key located on the control panel’s keypad. When the ice maker is turned on, a single ice cube symbol will flash. For lengthy vacations, it is best to switch off the water supply to the house first, followed by the ice maker and finally the main water line.