Sub-Zero Error Code EC 06 Defined as follows: Inconsistencies in the performance of the thermometer – This indicates that the evaporator thermistor in the refrigerator recorded inconsistent temperatures on a number of different times. It might also indicate that the thermistor has been shorted for more than 10 seconds or has been read open.
How do you clear error codes on a Sub-Zero refrigerator?
The problem code will be cleared once you have cleaned the condenser by pressing and holding the door ajar alarm key (the bell symbol) on the control panel for 15 seconds. Only when temperatures are close to normal can the error code be cleared. It is not necessary to clear the error code when temperatures do not return to normal or continue to climb.
Why is my Sub-Zero freezer beeping?
If the beeping noise occurs when the door is open, it is possible that the door ajar alarm is activated by the open door sensor. Disable or switch off the door ajar alarm to be sure it is not going off. Review the following information for particular product instructions on how to turn on or off the door ajar alarm: Built-In.
What does Lo c mean on Sub-Zero?
Answer: The display of L0 C on the control panel of a Classic (Formerly Built-In) (BI) Series product indicates that a command was input at the control board when the unit assumed that the door had been closed by accident. It should only display when the door switch is depressed completely. Close the door and leave it closed for 45 minutes to allow the control board to reset.
Do Sub-Zero refrigerators run all the time?
Sub-Zero is operational at all times, and temperatures are within normal range. Is it possible for a refrigeration product to perform better when it has a large amount of food in it? Do refrigerators and freezers that are empty have an impact on performance? There is too much food in the refrigerator, and the unit is too warm.
How do I reset my Sub-Zero ice maker?
See Frozen Ice Maker Fill Tube for further information. After you’ve cleared away any obstacles, turn the unit off and then back on to reset it. If ice production is interrupted often while a reverse osmosis system or well water is used, a pressure booster or regulator may be necessary to optimize performance.
How do I stop my Subzero fridge from beeping?
The unit may be turned off from the control panel by pressing the unit on/off button. Check for 15-30 minutes while the machine is turned off to check whether the beeping is still there. If the beeping persists even after the power to the unit has been switched off, it is unlikely that the noise is originating from the refrigerator.
How do I turn off my sub zero alarm?
The alarm is activated when the refrigerator or freezer door(s) or drawer is opened (s). Approximately 30 to 60 seconds after the door is opened, the door ajar alert sounds (time varies by product). The alarm will continue to sound until either the door is closed or the alarm is switched off on the control panel by the user. To turn off the alarm, press the Alarm key on your keyboard.
How do I silence my Subzero alarm?
How to mute an alarm on a Classic Series device that is always chiming: Answer Press and hold the ALARM and POWER keys at the same time for less than 5 seconds, then release both keys. This sequence conceals and mutes the fault indication for a period of 24 hours.
What happens when fridge light goes out?
A total power loss to the house will result in the failure of the lightbulb in the refrigerator, as well as the failure of every other light fixture and appliance in your residence. If this occurs, try to keep the refrigerator door closed as much as possible to safeguard the food within until the electricity is re-established.
How do you clean a Sub-Zero 685 condenser?
To clean the condenser region, attach a soft bristle brush attachment to your vacuum and vacuum the area thoroughly. Cleaning the condenser can be accomplished with a paint brush, an air compressor set on a low setting, or a can of pressurized air.
How many years does a Sub-Zero last?
Dust and lint may be removed from the condenser region with a soft bristle brush attachment on a vacuum. Cleaning the condenser can be accomplished with a paint brush, a low-speed air compressor, or a can of pressurized air.
What is the advantage of a Sub-Zero refrigerator?
Sub-Zero refrigerators are equipped with a working vacuum seal. Even though they are more difficult to open (which might be a concern for youngsters or the elderly), outside air is prevented from entering the refrigerator. The advantage is that the food remains fresher for a longer length of time as a result of this. The magnets in the refrigerator drawers serve the same purpose as the refrigerator doors.
What temperature should I keep my Sub-Zero refrigerator?
Vacuum seals are used in Sub-Zero freezers to keep food fresh. Even though they are more difficult to open (which might be a concern for toddlers or the elderly), outside air is prevented from getting inside the fridge. As a result, the food remains fresher for a longer amount of time, which is advantageous. This is also the reason why the refrigerator drawers are magnetic.