After replacing the water filter, reset the status. Press and hold the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter symbol will revert to its BLUE color and the words “Replace Filter” will vanish from the display.
How do you reset the filter light on a Maytag plus refrigerator?
If the CHANGE FILTER indicator light does not blink, press and hold the LOCK and LIGHT keypads until the CHANGE FILTER indicator light blinks again (approximately 3 seconds). The light’s control has been reset for another 12 months or 416 gallons of water consumption, whichever comes first.
How do I reset my Maytag plus refrigerator?
How Do I Reset the Front Panel of a Maytag Refrigerator?
- Holding down the power save and lights buttons at the same time for around 8 seconds is recommended. Press and hold the red/freezer buttons for roughly 8 seconds. Hold down the vacation and quick-freeze buttons at the same time for 8 seconds.
How do I reset the filter indicator light on my refrigerator?
By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light. If your model has an inside control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time.
How do you turn off the light on a Maytag refrigerator?
The “Alarm / Hold for 3 seconds to Reset Filter” button may be used to reset the indicator light by pushing and holding it for 3 seconds. If your model has an interior control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time to activate the cooling system.
- Continue to press and hold the LOCK and MEASURED FILL buttons at the same time for three seconds. To turn cooling back on, press and hold the LOCK and MEASURED FILL buttons for 3 seconds.
How do you reset a refrigerator after changing water filter?
It is necessary to locate the multi-function button(s) on your display that control the water filter indication in order to restore it to its default setting. Then push and hold the button(s) for a few seconds until the light turns green.
How do you reset the water filter light on a Frigidaire refrigerator?
How can I reset the filter light on my refrigerator?
- Amana – Press and hold the “Auto” and “Dispenser Lock” buttons for a few seconds until the water filter status indicator light starts flashing. Frigidaire – Press and hold the “Reset” button for several seconds. To reset your GE (General Electric) appliance, press and hold the “Reset” button for 10 seconds.
How do you reset the water filter light on a Whirlpool refrigerator?
Reset the state of the water filter once it has been changed. For 3 seconds, press and hold the “WATER FILTER” button on the remote control. Following a reset, the water filter symbol returns to its original BLUE color and the words “Replace Filter” are no longer visible on the display.
How do you put a Maytag refrigerator in diagnostic mode?
Entering the Service Test Mode can be accomplished by following the steps outlined below.
- In order to set an alarm, open the fresh food door and press and hold the door alarm keypad DoorAlarm. In order to set an up temperature in the refrigerator, press and hold the refrigerator temperature up keypad. Releasing the Door Alarm Keypad DoorAlarm and waiting for three seconds. Press the UP Keypad on the refrigerator one again.
How do I reset my Maytag ice maker?
You must first remove the ice tray in order to have access to it. You should be able to see the bright red reset button on the bottom of the ice maker once you have completed this procedure. This button must be pushed in and held down for 10 seconds to reset the ice maker.
Do you have to turn the water off to change a refrigerator water filter?
No, there is no need to shut off the water supply.
How do I turn off the water filter light on my GE refrigerator?
You must press and hold the RESET WATER FILTER pad until the red light on the water filter turns off after you have changed the filter. Either the light will go out or the light will become green.
How do I turn off the water filter light on my Samsung refrigerator?
Press and hold the CHILD LOCK and ICE TYPE buttons simultaneously for 2 seconds if you desire to totally switch off the filter replacement feature; the “change symbol” will be turned off.